Question: Am I able to setup Standard User Accounts for other users on my Compix system running Windows 10 or Windows 7? Answer: You are able to create other User Accounts on your Compix system, but they will need to be Administrator Accounts. Windows 10 and Windows 7 do not give the same privileges as Windows XP regarding setting up Standard Users as Power Users. In order to access Compix software and hardware, it is required to use an administrative account. It's more than

Problem: When I access the Compix Controller, I receive an error message like the following: -"CBoardConfigManager::_Initialize()failed: The input resolution is not compatible with the genlock resolution.." - "CCompixControllerDlg::_FillEngineProfile: Unable to create Flex EngineCreator:.." - "No hardware found" I am able to open GenCG, but nothing plays out when running a file. Cause: Adjusted the Compix Controller settings incorrectly from your incoming genlock or video in

For HD and HD Ready systems Please contact Compix support at 949.585.0055 or support@compix.tv . GenCG will most likely need re-activation if this happens. For SD-SDI and Analog systems with AllCG Boards You will need to place the AllCGinit.exe shortcut inside the Startup folder under [Start] > [Programs]. The file is originally located either in C:\Program Files\Compix\AllCG Utilities\ or C:\Compix\AllCG Utilities\. Right click on the file and select [Send To] > [Desktop (Cr

When Windows 7 does not boot successfully, it will open and run the System Recovery Option and try to resolve it automatically. If the issue still exists, you are able to access the System Recovery Options yourself with the Windows 7 Installation Disc and continue troubleshooting. Set the CD/DVD drive to boot before the hard drive. To do this, go to your BIOS (continually press the Delete key immediately after turning on the system). Under the [Boot] tab, use your keyboard to